Documents for Business

In excess of 1,000 customisable documents covering every conceivable business issue.

Introduction to this document

Safety briefing - liquid and spillage management

This briefing addresses the key risks and control measures needed to manage liquids in relation to spill prevention and control.

What’s covered?

The aim of this Safety Briefing - Liquid and Spillage Management is to ensure all staff are fully aware of the potential risks; what can happen if liquid spillage risks aren’t properly managed and what should be done to minimise the chance of a spill and injury or pollution in the event of a spill.

Hazards and risks

The briefing identifies the hazards and risks including slips, trips and falls, exposure to potentially hazardous substances, fire and pollution.

Management

Control measures include ensuring handling aids are in good order, all spills are cleaned up as quickly as possible and the spill is contained at source.

Key points

Attendees must take note of the following key points:

  • Keep an eye on all equipment, use it correctly and report any potential problems.
  • Remember all training and use a common sense approach whenever handling liquids.
  • Know the hazards of the liquids themselves.
  • If you see a spill, even small, deal with it or make sure that somebody does - however, when you do remember “safety first”, just as with any other emergency.